Twitter Facebook Tumblr Instagram

The 2010 Yamaha YZ250F

This just in from Yamaha, info and photos on the 2010 YZ250F. And the new 2010 Yamaha YZ250F is available in two versions – blue, and white! This bike is designed for racing supercross and motocross. And we’d like one. Or two. Or three.






Below you’ll see the photos and info that Yamaha provided to us on the new 2010 YZ250F. Enjoy!






The all-new, Bilateral Beam frame is specific to the 250 and is more compact than the previous generation chassis. This places the rider closer to the front wheel, which delivers superb rigidity balance for unmatched lightweight handling and cornering. This nimbleness lets the rider get on the gas sooner out of corners and cross the finish line with less fatigue – even on long motos.




The optimized engine delivers a new level of power in low-to-midrange, with a great torquey feel, exactly where riders want it. That is due to the new straight intake boot that enhances breathing, new carburetor that provides excellent throttle response and fuel atomization, and redesigned valve train components that reduce inertial mass and boost low end torque. Exhaust is also enhanced with a new D-shaped exhaust port and newly designed exhaust system. Ongoing refinement to the suspension and engine produces an amazingly balanced, light-handling machine with performance that’s accessible to all levels of riders.




All new styling emphasizes the bike’s light weight and nimble handling character. The sharp, horizontal lines set the bike apart, with a clean, aggressive look.




KYB® suspension has been recalibrated front and rear and is tuned to work with the new Bilateral Beam frame for unmatched handling. The clutch lever has a lighter pull feel even though the clutch has stronger engagement. The new clutch also has a wider engagement range that will give riders an advantage off the line . . . shift after shift, moto after moto.




There’s no disputing the YZ250F’s unmatched four-stroke prowess – it was the 1st four-stroke 250 motocross bike on the market, the 1st to win an international race, the 1st to win an AMA Supercross and the 1st to take an AMA U.S. Supercross Championship title, as well as the first to win an AMA National race.






ALL NEW FOR 2010 on the Yamaha YZ250F




ENGINE:




The valve spring retainers are now lightweight aluminum instead of steel, and valve spring pressure is lighter for reduced valve opening force. This contributes to superior low-to-mid range torque characteristics due to less power-robbing friction. There’s also a new, higher lift cam profile, while valve stem ends are chromium-nitride coated for exceptional reliability and reduced maintenance.




The exhaust port shape has a “D” shape instead of round. This increases velocity through the port for excellent throttle response, while enhancing the power feeling of the engine.




The newly designed radiator is lower and further back and the oil tank is more compact and repositioned to achieve greater mass centralization.




The carburetor bore has a new venturi shape, plus there’s recalibrated jetting and a new accelerator pump. This translates to impressive response when the rider snaps open the throttle, and contributes to superb torquey low-to-midrange power characteristics.




The intake boot offers a straight, smooth tract for excellent engine breathing and more power. The airbox is reshaped to tuck neatly into the Bilateral Beam frame.




The exhaust pipe has been carefully tuned to optimize engine power, with a muffler that’s 50mm longer and with a narrower core – a design that lets the YZ250F comfortably meet the latest noise standards without sacrificing power.




Engineers were able to increase the clutch spring load for stronger engagement, yet, thanks to a recalibrated clutch actuation arm cam ratio, lever pull is actually lighter than before.




Third and fourth gear ratios are slightly taller, and third, fourth, and fifth gears are stronger than ever with new drive dog shapes for positive engagement. That gives riders a strong gearbox that’s been carefully matched to engine power characteristics.




CHASSIS/SUSPENSION:




The Bilateral Beam frame is crafted from a carefully chosen combination of forged and extruded aluminum pieces – 20 in all – all welded together to provide unmatched rigidity balance.




The KYB® speed-sensitive front fork delivers exceptional damping feel, responsiveness, and bump absorption characteristics. Damping settings are revised, the piston rods have a new surface treatment, and the oil seal is a new design.




The 4-way-adjustable KYB® rear shock has been redesigned to make the most of the Bilateral Beam frame design. It’s lower in the frame for excellent mass centralization, and has new damping characteristics.




The new tank, seat, and rear fender are flat and the relationship between handlebars, pegs, and seat result in a natural, more forward riding position that facilitates rider movement. The fuel tank has been moved toward the center of the bike for mass centralization. The ProTaper® bars are four-way adjustable, and handlebar mounts and footpegs are 5mm higher to optimize rider position on the new chassis.




ADDITIONAL FEATURES:




The CDI unit has revised ignition mapping to match new engine intake and exhaust specs.




Riders have a choice of two color options on the new 2010 Yamaha YZ250F: Team Yamaha Blue and White or White and Red.




AVAILABLE ACCESSORIES:


Please refer to the Yamaha Off-Road Accessories & Apparel Catalog or go to www.yamaha-motor.com





The 2010 Yamaha YZ250F - Photo 1 of 4




Close up Yamaha YZ 250F, the blue 2010 version





The 2010 Yamaha YZ250F - Photo 2 of 4




Close up YZ 250F, the white 2010 version





The 2010 Yamaha YZ250F - Photo 3 of 4




YZ 250F, the white 2010 version





The 2010 Yamaha YZ250F - Photo 4 of 4




The blue Yamaha YZ250F, 2010 model











Comments

comments